Tile Doctor Forums, find answers to everyday Tile, Stone and Grout Problems
     TILE DOCTOR ®         Tile Forums         
Need to remove Thompson Wet Look Sealer

Asked by Colin Parmenter from SS6: Slate patio has been sealed using Thompson Wet Look Sealer but contractor did not remove excess pointing before sealing. Sealer needs removal so cement & lime stains can be removed before resealing.

TileProf says: Hi Colin, Use Tile Doctor Remove and Go mixed 50/50 with Nnao-clean for the sealer remover,leave for at least an hour to let it work in a break down the new sealer, rinse with water, then use a Wet Vac to suck up all the old solution. Then once dry apply Grout clean up neat to the affected grout haze and deposits, scrub and rinse within a minute of applying it. Then re-seal once dry. see links below for more info about the prodcuts Regards Russell at Tile Doctor http://www.tiledoctor.co.uk/Nanotech-UltraClean.html http://www.tiledoctor.co.uk/AcidCleaner.html http://www.tiledoctor.co.uk/Remover.html

To reply to this question please login
Return to Questions