Menu
Category List
Related Items
Tile Doctor Seal and Go Extra 1 Litre
A special acrylic based formula which allows moisture vapour transmission making it fully breathable and ideal for situations where no damp proof membrane has been installed and mineral salt deposits (efflorescence) occur.
£20.00

Tile Doctor Seal & Go Sealer 5 Litre
A specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable low-sheen finish.
£69.00

Tile Doctor Seal and Go Extra 5 Litre
Details
Tile Doctor Seal and Go Extra 5 Litre
Item Name
Tile Doctor Seal and Go Extra 5 Litre
Item #
735001
Price/ea
£89.00

Product Image Gallery

Seal & Go Extra Sealer

A special acrylic based formula which allows moisture vapour transmission making it fully breathable and ideal for situations where no damp proof membrane has been installed and mineral salt deposits (efflorescence) occur.

Uses:

Use on internal or external Victorian floor tiles, Sandstone, Flagstones, Terracotta, Saltillo and rough Slate.

Method of Application:

  1. Read entire label before using.
  2. For new installations sealer can be applied as soon as forty eight hours after grouting.
  3. Surface must be clean, dry, and free of existing sealers or coatings.
  4. Apply using a sponge or paint pad applicator. Avoid puddling.
  5. If two or more coats are applied, allow a minimum of thirty minutes drying time between coats.
  6. Two hours after final coat conduct a test to determine if surface is completely sealed by applying water droplets to the surface. If water is absorbed, apply an additional coat. Wait two hours and repeat the test.
  7. Ready for surface traffic six hours after final coat. Keep area dry for at least six hours. Achieves a full cure in twenty four hours.
  8. Clean applicator tools with water after each use.
  9. May be reapplied as needed to surface that is clean and dry.

Sealing a Terracotta Tiled Floor with Seal and Go Extra in Malvern
Sealing a Terracotta Tiled Floor with Seal and Go Extra in Malvern

Coverage:

A single 1 Litre bottle will cover approximately 8m² to 25m² (80 to 265 sq. ft.) per coat, depending on type, porosity and texture of surface, temperature, humidity, and method of application.

Precautions

For full usage precautions and other safety information when using this product please download the Tile Doctor Seal and Go Extra Safety Data Sheet

Pricing:

Available in 1 litre bottle at £20.00 each and 5 litre bottles at £89.00 each, Postage and Packing £7.50 for a one litre bottle, £10.00 for two or more litres (All prices are shown inclusive of VAT).

Quantity
 
A special acrylic based formula which allows moisture vapour transmission making it fully breathable and ideal for situations where no damp proof membrane has been installed and mineral salt deposits (efflorescence) occur.
    Telephone/Fax: 0845 652 4652, E-Mail Info@TileDoctor.co.uk Tile Doctor - tile, stone and grout cleaning & sealing specialists
© Copyright TileDoctor 2015

ASP.NET Shopping Cart Software