 |
|
|
TILE DOCTOR Grout Seal & Go Grout Sealer |
|
|
|
|
| Tile Doctor Grout Sealer |
 |
Water based grout sealer that prevents water, oil and acid based contaminants from spoiling the appearance and colour of grout yet allows moisture vapour transmission.
Reduces maintenance and is transparent so not to affect the colour of the grout. |
| Uses |
| Recommended for use of cementations sanded and unsanded grout joints in interior or exterior ceramic tile installations. |
 |
Highly recommended for bath or shower areas to prevent mould and grout staining from continued use of acid and alkaline formulated shampoos and soaps etc. |
| Method of Application |
1.) Read entire label before using.
2.) TEST A SMALL AREA, according to application instructions, with a 24-hour cure time to determine desired results. Test for stain repellency using likely contaminants.
3.) For new installations, sealer can be applied 48 hours after grouting
4.) Grout joints must be clean, dry, and free of existing sealers or coatings.
5.) Apply 1 to 2 coats with a soft-bristle paint brush or sponge paint applicator
6.) Using cotton or paper towels, polish dry any sealer remaining on the tile and grout within 3 to 5 minutes of application.
7.) Clean applicator tools with water after each use.
|
| Cure Time |
♦ If 2 coats are applied, allow a minimum of 30 minutes drying time between coats.
♦ Ready for surface traffic 2 hours after final coat.
♦ Sealed area should be kept dry for 12 hours.
♦ Achieves a full cure in 24 hours.
♦ Conduct a test to determine if surface is completely sealed after 2 hours by applying water droplets to the surface. If water is absorbed, apply an additional coat, wait 2 hours and repeat the test.
|
| Coverage |
|
One 710ml bottle will cover approximately 5 m2 to 17 m2 (60 to 190 sq. ft.) per coat, depending on the size and porosity of the grout joint, temperature and method of application.
|
| Expected Wear |
|
Will vary depending on hardness and texture of the surface, type of area, surface wear, frequency and type of maintenance products used. The expected wear is up to 5 years. Extreme weather conditions, harsh cleaning methods and high-alkaline or solvent based cleaners will affect wear.
|
| Shopping Information |
 |
710ml bottles £15.00 each.
Postage packing is £5.00 for the first item and £2.50 for additional items. |
|
| Limitations |
Handling & Storage |
♦ Do not allow sealer to dry on tile surface because a residue will be
visible.
? Do not allow sealer to come in contact with any non-recommended surface. |
♦ Close container after each use.
♦ Store in original Container only.
♦ Store and use in temperatures between 10°c and 27°c (50°F and 80°F).
♦ Protect unused, stored product from freezing. |
| CAUTION |
| ♦ KEEP OUT OF REACH OF CHILDREN |
| ♦ Eye and skin irritant. |
♦ May be harmful if swallowed. |
| ♦ Contains siliconates. |
♦ Do not take internally. |
| ♦ Rubber gloves and eye protection should be worn during application |
| IF INGESTED: | Do not induce vomiting. Drink 1 to 2 glasses of water. Seek immediate medical attention. |
| EYE CONTACT: | Flush thoroughly with water. Seek immediate medical attention. |
| SKIN CONTACT: | Flush with water. |
|
|
|
|
