Vinyl Shine Floor Sealer
Tile Doctor Vinyl Shine is a modern high solids polymer floor seal and polish designed to protect and enhance the appearance of Vinyl floor tiles. The formula includes special polymers which produce a 'Wet Look' finish whilst enhancing slip-resistance. A first coat seals and protects the floor and a second produces a gloss finish. An optional third coat will give you a super high gloss finish.
Tile Doctor Vinyl Shine is suitable for use on Amtico, Karndean and all other types of vinyl tiles or coverings. Suitable for use in high traffic areas such as hospital corridors and wards, schools, offices, shops, airports etc.
Method of Application:
- Read entire label before using.
- PREPARATION: For best results, the floor must be thoroughly cleaned to completely remove dirt, greese and old polish films using a quality floor polish remover such as Tile Doctor Vinyl Strip. The floor must then be well rinsed with water and allowed to dry.
- APPLICATION: Apply a thin film of Tile Doctor Vinyl Shine using a mop or polish applicator. Drying time is normally around 30 minutes after which a second coat should be applied and allowed to dry. Repeat with a third coat if super high gloss finish is desired.
A five litre bottle will cover approximately 300m2 (3,200 sq. ft.) per coat, depending on the porosity of the vinyl.
For full usage precautions and other safety information when using this product please download the Tile Doctor Vinyl Shine Sealer Safety Data Sheet
Available in 5 litre bottles at £68.30 each, Postage and Packing £5.50 for one bottle, £10 for two or more bottles (All prices are shown inclusive of VAT).